Mason Mechanical Labs, is a proud dealer of Newall Digital Read Out Systems. We carry and install Newall's full line of DRO equipment. Newall's proven, innovative and highly accurate Steel Ball design provides consistent and reliable accuracy even in the harshest of shop conditions. No longer do you need to deal with fragile glass scales which can be affected by water, oil or coolant. Newall's design carries an IP67 environmental rating which continues to provide accurate readings even when submerged in water, oil or coolant.
Call Mason Mechanical Labs at:
1-800-925-1838
We Offer The Following Options
Updated on 9/24/03
Newall Waranty:
Covered By The Best Warranty Available.
5 Year Warranty: DROs Warranted to be free from defects in materials and workmanship for a period of 5 years from the dtae of purchase.
3 Year No-Fault Warranty: During the first 3 years of ownership, Newall's No-Fault Warranty covers system failures caused by accidental damage, customer abuse and even improper installation.
(professional installation is suggested to insure proper and accurate functioning)
Loaner Unit Program:
Newall helps assure you are up and running with the least amount of downtime, by providing a Loaner Unit to replace your defective unit should it need to be serviced. At which time you simply return the loaner unit once yours has been returned to you.
(registering your unit upon purchase required for loaner unit availability)
|
Encoder Features
|
|
||
 |
|||
|
Specifications
|
SPHEROSYN®
|
MICROSYN 10®
|
MICROSYN 5®
|
| Environmental |
IP67
|
IP67
|
IP67
|
| Accuracy |
+/-0.0004 +0.0002"/meter (+/-10µm + 5µm/meter) |
+/-0.0004" (+/-10µm) |
+/-0.0002" (+/-5µm) |
| Repeatability |
Within one resolution count
|
Within one resolution count
|
Within one resolution count
|
| Resolution |
0.0005"/0.0002" (0.010mm/0.005mm) |
0.0005"/0.0002"/0.0001"/0.00005" (0.01mm/0.005mm/0.002mm/0.001mm) |
0.0005"/0.0002"/0.0001"/0.00005" (0.01mm/0.005mm/0.002mm/0.001mm) |
| Scale Travels |
4" (102mm) to 462" (11.7M)
|
2" (50mm) to 40" (1M)
|
|
| Reader Head Dimensions |
2.04" x 5.16" x 1.10" (51mm x 131mm x 28mm) |
1.38" x 2.95" x 0.70" (35mm x 75mm x 20mm) |
|
Scale Diameter /Material |
0.601" (15.25mm)/Stainless Steel
|
0.257" (6.5mm)/Carbon Fiber
|
|
| Overall Scale Length |
Scale Travel Length + 10" (250mm)
|
Scale Travel Length + 7" (175mm)
|
|
| Maximum Traverse Speed |
4800"(120M) per minute
|
1800"(45M) per minute
|
|
| Output Cable Length |
11.5' (3.5M) Stainless Steel Armored (extension Cables available) |
11.5' (3.5M) Stainless Steel Armored (extension Cables available) |
|
| Shock (11ms) |
100g (IEC69-2-6)
|
100g (IEC69-2-6)
|
|
| Vibration (55- 2000 Hz) |
30g (IEC68-2-27)
|
30g (IEC68-2-27)
|
|
| Output |
2.0V+/-0.5rms, 1kHz phase analogue, 360 degrees per
12.7mm
|
2.0V+/-0.5rms, 1kHz phase analogue, 360 degrees per
5.0mm
|
|
|
Standard Features
|
|
|
C70
|
C80
|
 |
 |
|
|
|
C80 Additional Information
|
|
|
1 = Mill Specific Features 2 = Lathe Specific Features |
|
|
Standard Features
|
|
|
E70-M (mill)
|
E70-L (lathe)
|
 |
 |
|
|
|
EE Series Digital Sending Unit (DSU)
|
|
 |
|
|
The E Series DROs are seperated from their DSU to ease
in mounting and locating the Digital Reat Out. The Digital Sending Unit
can be mounted anywhere on the machine out of the way, thus making mounting
and wiring of the DRO much simpler. All encoders are connected to the
DSU and one 11.5' cable is supplied to connect the DSU to either the E70-M
or the E70-L display.
|
|
|
Standard Features
|
|
|
|
DP8 Mill
|
DP8 Lathe
|
 |
 |
|
|
|
DP8 EDM
|
DPG 2000
|
|
Designed specifically for use on Electrical Discharge Machines, features of the DP8 EDM cabinet include:
|
The DPG 2000 is used for basic measuring operations. Although commonly used in a single axis version, the unit is also available in two or three axis.
|
|
DP8 Lathe CSS
|
DP8 Steelpac
|
|
For use with variable Speed Lathes with DC motors, the
DP8 Lathe CSS includes all the features of the DP8 Lathe display plus
the added feature of Spindle Speed Control. The operator enters the required
surface speed and the DP8 will automatically adjust the RPM depending
on the diameter being turned. This feature increases tool life and provides
for a better surface finish.
|
The DP8 Steelpac was designed to increase productivity of ironworkers. Features include:
The DP8 Steelpac enables accurate and fast positioning of the work piece thereby increasing productivity and reducing scrap costs. |
|
Lathe Package
|
|
|
Each Package Includes The Following:
|
 |
|
Travel Sizes: |
|
|
Other scale travels and systems configurations are available |
|
Milling Machine Package
|
|
|
Each Package Includes The Following:
|
 |
|
Travel Sizes:
|
|
|
|
View Mason Mechanical Labs, Inc.